Metal Labels, Logo Plates & Emblems
Nickel-free metal logo plates and emblems in gold, silver, gunmetal and enamel finishes.
- Own productionLabel production in Bulgaria
- 10–20 daysAfter approval
- Proof in 24–48 hExpress design
- OEKO-TEX & GRSRecycled options
- From 1,000 pcsPer design
Metal labels: your logo as hardware
A metal label turns a logo into a piece of hardware. Small logo plates on a waistband, emblems on a bag flap, badges on a cap or a slim plate on the pocket of a jacket all signal weight and quality in a way fabric labels cannot. Metal labels stay sharp for years, resist abrasion and can be made in finishes that match zips, buttons and buckles on the same product.
We design and produce metal labels in our own production in Bulgaria, from the mould or cutting tool to plating and quality control. All of our metal products are nickel-free. When you see "nickel" in our finish list, it only describes a colour look, not the metal content.
Materials
Zinc alloy
Zinc alloy is die-cast in a steel mould, which makes it ideal for three-dimensional emblems, rounded edges, cut-outs and multi-level reliefs. It is the most versatile material for detailed logos and takes almost every plated finish.
Brass
Brass is stamped from sheet and has a warm, solid feel. It suits flat or lightly embossed plates and premium finishes such as polished gold or antique brass.
Aluminium
Aluminium is very light, which matters on lightweight garments and caps. It can be anodised in colours, printed, or laser-engraved for a bright metallic mark on a coloured surface.
Stainless steel
Stainless steel is highly corrosion-resistant and robust, a good choice for outdoor gear, workwear and bags exposed to weather. It is usually brushed, polished or laser-engraved.
Finishes and decoration
- Plated colours: gold, light gold, silver, gunmetal, black, rose gold, copper and nickel-look finishes.
- Antique finishes: antique brass, antique silver or antique copper, where the recesses are darkened to emphasise relief.
- Surface textures: high polish, matt, satin, brushed or sand-blasted, also combined on one piece (for example a matt plate with a polished logo).
- Enamel fill: soft or hard enamel colours filled into recessed areas, matched to Pantone references.
- Laser engraving: fine text, serial numbers or small logos without a dedicated tool, also for short or variable series.
- Protective lacquer: a clear e-coat or lacquer to protect the finish against abrasion and humidity.
Attachment methods
- Prongs (claws): two or four prongs pass through the fabric or leather and are bent over a backing plate. Clean front, fast to apply.
- Stitch holes: small holes at the ends or corners so the plate can be sewn on, typical for waistbands and knitwear.
- Screws or rivets: threaded posts or rivets for bags, leather goods and luggage.
- Adhesive backing: a strong double-sided adhesive for packaging, hard goods and gift boxes.
Tip: on thin or stretchy fabrics, ask for a small backing plate or a reinforcement patch behind the prongs. It spreads the load and keeps the plate straight after washing.
Typical sizes
The sizes below are common starting points. We also produce custom outlines and dimensions.
| Size (mm) | Thickness (mm) | Type | Typical use |
|---|---|---|---|
| 20 × 5 | 0.5–0.8 | Slim plate | Knitwear, cuffs, small accessories |
| 30 × 8 | 0.6–1 | Logo plate | Waistbands, pockets, caps |
| 40 × 10 | 0.8–1.2 | Logo plate | Jackets, trousers, bags |
| 50 × 15 | 1–1.5 | Logo plate | Bags, outerwear, leather goods |
| Ø 15–25 | 1–1.5 | Round emblem | Caps, shirts, small leather goods |
| 25–40 (any outline) | 1–1.5 (relief more) | Shaped emblem / badge | Bag flaps, backpacks, outerwear |
For guidance on proportions and placement, read our article on how to choose label size.
Design notes
Die-cast zinc alloy can reproduce raised or recessed lines down to roughly 0.3–0.5 mm, while very fine text is better laser-engraved. Enamel needs a small metal wall between colours, so separate colour areas should not touch. Our designers check these points when they prepare the technical drawing, so you see exactly what will be produced before tooling starts.
Ordering, MOQ and lead time
Send your logo, preferred size, material and finish, and tell us how the label will be fixed. Our express label design team will prepare a dimensioned drawing and a digital proof, typically within 24–48 h. The minimum order is usually 1,000 pcs per design. A physical sample can be made before bulk production. Once the sample is approved, production typically takes 10–20 working days, with delivery anywhere in the EU and no customs inside the Union; express options are available on request.
Metal labels combine well with leather labels on denim and bags, with hang tags using matching metal eyelets, and with woven labels inside the garment. Our guide on ordering labels from our own production explains how working with the production team keeps finishes consistent across reorders. See produced examples in our Labels 2026 catalogue on the catalogues page.
Send us your logo and the product it will go on, and we will recommend material, finish and fixing. Request a quote from our production team.
Frequently asked questions
Are your metal labels nickel-free?
Yes. All of our metal labels, plates and emblems are nickel-free. A nickel-look finish only describes the silver-grey colour, not the metal content.
Which metal is best for metal logo plates?
Zinc alloy suits detailed 3D emblems and shaped designs, brass gives a warm premium plate, aluminium is the lightest option and stainless steel is the most weather-resistant.
How are metal labels attached to garments and bags?
Common options are prongs bent over a backing plate, stitch holes for sewing, screws or rivets for bags and leather goods, and adhesive backing for hard goods and packaging.
Can metal emblems have coloured logos?
Yes. Recessed areas can be filled with soft or hard enamel matched to Pantone references, combined with plated finishes such as gold, silver or gunmetal.
What is the minimum order for metal labels?
The minimum order is usually 1,000 pcs per design. A physical sample can be made before bulk production.
Get a price for metal labels
Tell us what you need. We reply within 24 h on working days with a price and a recommendation.
Tell us about your labels
Send the label type, size, quantity and your deadline. We usually reply within one working day with a price and a recommendation.
- Usual MOQ 1,000 pcs per design
- Samples before production
- Production 10–20 working days
- Delivery across Europe