Woven Labels
Damask, satin and taffeta woven labels from our own jacquard looms – sharp logos, soft ultrasonic-cut edges and every common fold.
- Own productionLabel production in Bulgaria
- 10–20 daysAfter approval
- Proof in 24–48 hExpress design
- OEKO-TEX & GRSRecycled options
- From 1,000 pcsPer design
Materials for this label type
- Damask
- Satin
- Taffeta
- Cotton
- Recycled polyester (GRS)
What woven labels are
A woven label is not printed: your logo is built thread by thread on a jacquard loom, so the design is part of the fabric itself. That is why woven labels survive hundreds of wash cycles without fading, cracking or peeling, and why they remain the default choice for neck labels, side-seam brand tabs and logo flags on everything from knitwear to workwear. We weave them in our own production in Bulgaria, on industrial looms run by a team with more than 30 years in garment accessories – so when you ask a technical question, the answer comes from the people who set up your job.
Weave qualities: damask, satin, taffeta
The weave you choose decides how much detail the label can carry, how it feels against the skin and how it looks on the garment.
Damask woven labels
Damask uses fine polyester yarns at a high weft density. The result is a thin, flexible label that reproduces small lettering, fine lines and detailed logos very cleanly. It is our recommendation for most fashion neck labels. A high-definition damask variant uses even finer weft yarns for micro text (around 1 mm cap height) and detailed emblems.
Satin woven labels
Satin weaving floats the yarns on the surface, giving a glossy, smooth face and a very soft hand. It suits lingerie, baby wear, eveningwear and premium shirts. The trade-off is slightly less sharpness on very small details than damask.
Taffeta woven labels
Taffeta is a lower-density, crisp weave and the most economical option. It works well for simple logos, text-only labels and large volumes where detail is not critical, such as basics or promotional textiles.
Cotton-look and special yarns
For a natural, matte look we can weave with cotton-look polyester or recycled polyester yarns, and add metallic accents to a design. Ask us which combination fits your colours and budget.
Colours and design limits
Each colour in a woven label is a separate weft yarn, so colours are counted, not printed. As a guide, a damask label typically carries the background plus up to 7–8 colours; satin and taffeta work best with fewer. We match yarns to your Pantone references as closely as the yarn range allows – woven colours always read slightly differently from print, which is why we recommend checking a physical sample. Gradients and photo effects cannot be woven; our express label design team will simplify artwork so it weaves cleanly, with a digital proof typically within 24–48 h.
Sizes and fold types
Woven labels are woven on wide looms and then cut and folded. The tables below show typical sizes we produce; custom widths and lengths are possible.
| Width (mm) | Typical lengths (mm) | Common use |
|---|---|---|
| 10 | 30–60 | Mini logo flags, small accessories |
| 15 | 40–70 | Side-seam tabs, loop-fold logo tags |
| 20 | 40–80 | Neck labels for T-shirts and knitwear |
| 25 | 50–90 | Standard neck labels |
| 30–35 | 50–100 | Jackets, coats, outerwear |
| 40–60 | 60–120 | Bags, home textiles, large brand labels |
| Fold type | How it works | Example finished size (mm) |
|---|---|---|
| Straight / flat cut | No fold; sewn on all four sides or at the ends | 20 × 50 |
| End fold | Both ends folded under (approx. 7 mm each) for a neat, sewn-in edge | 15 × 50 (cut length approx. 64) |
| Centre fold | Folded in half and sewn into a seam; front and back usable | 20 × 50 (cut length 100 + seam allowance) |
| Loop fold | Folded in half, both ends sewn into a seam as a loop or flag | 15 × 30 (cut length approx. 70) |
| Mitre fold | Ends folded at 45° to form a hanging loop | 15 × 60 |
| Booklet / Manhattan fold | Centre fold plus end folds, sewn along one edge | 25 × 50 |
Not sure which fold suits your garment? Read label fold types explained or use our label size guide.
Cutting and edges
How a label is cut matters as much as how it is woven, because the edge is what touches the neck.
- Ultrasonic cut – our standard. High-frequency vibration melts and seals the edge, leaving it soft, clean and flat, without the hard bead that causes scratching.
- Heat (hot-knife) cut – a heated blade seals the edge. Economical for straight-cut labels, but the edge can be firmer.
- Woven edge (selvedge) – labels woven to width on a needle loom, with a true woven border on the long sides. Very soft and premium; only the ends are cut.
- Laser cut – for shaped labels and contours that a straight blade cannot follow.
Finishing and attachment
Most woven labels are sewn in. Depending on use, we can add a back coating that stabilises the label and prevents fraying, an iron-on (heat-seal) backing for quick application on finished garments, or an adhesive backing for bags and packaging. A softening finish is available for labels worn directly on the skin. Labels can be delivered cut and folded, ready for the sewing line, or on rolls for automatic cutting.
Quality, MOQ and lead time
We work with OEKO-TEX certified yarns and industrial-grade raw materials. The minimum order is usually 1,000 pcs per design. After you approve the proof or sample, production typically takes 10–20 working days, and we deliver across Europe from our EU base in Bulgaria – no customs inside the EU. If a launch date is tight, mention it in the quote form and we will check express options. Physical samples are available before production.
Comparing techniques? See woven vs printed labels, or combine your brand label with matching care labels and size labels. You can also browse our Labels 2026 catalogue on the catalogues page.
Recycled options (GRS)
Damask, satin and taffeta labels can be woven from recycled polyester (rPET) yarn spun from recycled PET. Strength, colour fastness and wash durability match virgin polyester; the main differences are a defined yarn colour programme and slightly warmer optical whites, which you see on the sample. We are certified to the Global Recycled Standard (GRS) as well as OEKO-TEX, so a recycled version is produced on the same equipment in Bulgaria, to the same quality, and can be documented: we supply our scope certificate and, if your supply chain is certified, a transaction certificate for your shipment. Mention it in your quote request. Read more on recycled and GRS-certified labels, or compare all bases in our label materials guide.
Send us your logo, the size and the fold you have in mind – we will reply with a proof and a price. Request a quote
Frequently asked questions
What is the difference between damask, satin and taffeta woven labels?
Damask is woven with fine yarns at high density and shows the most detail. Satin has a glossy surface and a very soft feel, with slightly less fine detail. Taffeta is a crisper, lower-density weave and the most economical choice for simple logos.
How many colours can a woven label have?
Each colour is a separate yarn. A damask label typically carries the background plus up to 7 to 8 colours; satin and taffeta work best with fewer. Gradients and photographic effects cannot be woven.
What is the minimum order for custom woven labels?
The minimum order is usually 1,000 pieces per design. Production typically takes 10 to 20 working days after proof or sample approval.
Will woven labels scratch the skin?
We cut woven labels ultrasonically as standard, which seals the edges soft and flat. For labels worn directly against the skin we can also add a softening finish or use a woven edge.
Can I get a sample before ordering?
Yes. Physical samples are available before production, and a digital proof is typically ready within 24 to 48 hours.
Get a price for woven labels
Tell us what you need. We reply within 24 h on working days with a price and a recommendation.
Tell us about your labels
Send the label type, size, quantity and your deadline. We usually reply within one working day with a price and a recommendation.
- Usual MOQ 1,000 pcs per design
- Samples before production
- Production 10–20 working days
- Delivery across Europe